Self help guide

The compactor is completely dead.
  1. Make sure the main switch of the machine is turned on.
  2. Make sure all red emergency stops are pulled out. There can be as many as 4 of them.
  3. Make sure that the electrical cable is connected and that it is not broken.
  4. Check fuses in the fusebox of the property.
  5. Check the property’s residual current circuit braker (if there is one).
  6. Make sure the remote control cable is connected (if there is one).
  7. Call Service Link +46 8 522 255 70
The compactor is sounding but the press plate does not move.
  1. Check the fuses in the fusebox of the property. A phase fuse may have blown.
  2. Static compactors have a switch “Manual – Auto” at the side close to the container connected to the press part. Switch to “Auto” and try again.
  3. Make a phase change in the red electrical glove at the machine. Pull out the cable and check if there is a phase changing button between two of the brass pins at the machines red plug (Male). Turn 180 degrees. Use straight screwdriver.
  4. Call Service Link +46 8 522 255 70
The compactor’s press plate is moving but the waste is not falling down.
  1. Use a long stick, broom stick, board or similar. Try to press down some part of the waste to destroy the waste bridge that has formed. Warning! Never climb down into the hopper.
  2. Call Service Link +46 8 522 255 70
The compactors hydraulic/ automatic lid does not open.
  1. Start the machine and try again.
  2. Press down two buttons at the same time to open the lid – double hand hold.
  3. Call Service Link +46 8 522 255 70
The fuses in the property blows as soon as the machine starts.
  1. Make sure the power cable between the machine and the power outlet is unbroken.
  2. Makes sure that all other power cables are unbroken.
  3. Exchange cable from other machine and try again.
  4. Call Service Link +46 8 522 255 70
Bale press is completely dead.
  1. Make sure that both front doors are properly closed.
  2. Make sure that the red emergency stop is pulled out.
  3. Make sure that the main switch is on.
  4. Make sure that the power cable is properly connected.
  5. Check the fuses in the fusebox of the property.
  6. Check if the residual current circuit braker has been triggered (if there is one).
  7. Call Service Link +46 8 522 255 70
The tipping device does not lift the waste bin
  1. Start the tipping device or the compactor first.
  2. You may need to push down two buttons at the same time – dubble hand hold.
  3. Check that the red emergency stop is pulled out.
  4. Call Service Link +46 8 522 255 70
The container full indicator lamp still lits after emptying.
  1. Turn the main switch to “0” (off), wait for 10 seconds and turn back the main switch to “1” (on). On certain machines it is enough to press down an emergency stop, wait and pull it out again.
  2. Make sure the container is really emptied. When you knock on the container wall plate from the outside you should hear a hollow metal sound everywhere along the plate.
  3. Make sure the red emergency stop is pulled out.
  4. Call Service Link + 46 8 522 255 70